本文目录一览:
- 1、阿里云默认centos7上怎么安装php
- 2、linuxcentos7中怎么搭建php服务器
- 3、如何在centos7搭建web服务器
- 4、centos7部署php网站需要什么步骤
- 5、如何在阿里云Centos7服务器下安装部署Nginx+PHP+Mysql+PHP扩展
阿里云默认centos7上怎么安装php
首先更新系统软件/str
$ yum update
安装nginx/str/str
1.安装nginx源
$ yum localinstall .安装nginx
$ yum install nginx
3.启动nginx
$ service nginx start
Redirecting to /bin/systemctl start nginx.service4.访问http://你的ip/
如果成功安装会出来nginx默认的欢迎界面
安装MySQL5.7.*
/str
1.安装mysql源/str
$ yum localinstall .安装mysql
$ yum install mysql-community-server
确认一下mysql的版本,有时可能会提示mysql5.63.安装mysql的开发包,以后会有用
$ yum install mysql-community-devel
4.启动mysql
$ service mysqld start
Redirecting to /bin/systemctl start mysqld.service5.查看mysql启动状态
$ service mysqld status
出现pid
证明启动成功
6.获取mysql默认生成的密码
$ grep 'temporary password' /var/log/mysqld.log2015-12-05T05:41:09.104758Z 1 [Note] A temporary password is generated for root@localhost: %G1Rgns!dD!v/str
加粗的就是生成的密码
7.换成自己的密码
$ mysql -uroot -p
Enter password:输入上面的密码
成功输入后进入一下步,这里你估计会输入 好几次才进去8. 更换密码
mysql ALTER USER 'root'@'localhost' IDENTIFIED BY 'MyNewPass4!';这个密码一定要足够复杂,不然会不让你改,提示密码不合法;9.退出mysql;
mysql quit;
10.用新密码再登录,试一下新密码
$ mysql -uroot -p
Enter password:输入你的新密码
11.确认密码正确后,退出mysql;
mysql quit;
编译安装php7.0.0
/str
/str
1.下载php7源码包/str
$ cd /root wget -O php7.tar.gz .解压源码包/str
$ tar -xvf php7.tar.gz
3./str
$ cd php-7.0.1
4.安装php依赖包/str
/str
$ yum install libxml2 libxml2-devel openssl openssl-devel bzip2 bzip2-devel libcurl libcurl-devel libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel gmp gmp-devel libmcrypt libmcrypt-devel readline readline-devel libxslt libxslt-devel5.编译配置,这一步我们会遇到很多configure error,我们一一解决,基本都是相关软件开发包没有安装导致/str
/str
$ ./configure \
--prefix=/usr/local/php \
--with-config-file-path=/etc \
--enable-fpm \
--with-fpm-user=nginx \
--with-fpm-group=nginx \
--enable-inline-optimization \
--disable-debug \
--disable-rpath \
--enable-shared \
--enable-soap \
--with-libxml-dir \
--with-xmlrpc \
--with-openssl \
--with-mcrypt \
--with-mhash \
--with-pcre-regex \
--with-sqlite3 \
--with-zlib \
--enable-bcmath \
--with-iconv \
--with-bz2 \
--enable-calendar \
--with-curl \
--with-cdb \
--enable-dom \
--enable-exif \
--enable-fileinfo \
--enable-filter \
--with-pcre-dir \
--enable-ftp \
--with-gd \
--with-openssl-dir \
--with-jpeg-dir \
--with-png-dir \
--with-zlib-dir \
--with-freetype-dir \
--enable-gd-native-ttf \
--enable-gd-jis-conv \
--with-gettext \
--with-gmp \
--with-mhash \
--enable-json \
--enable-mbstring \
--enable-mbregex \
--enable-mbregex-backtrack \
--with-libmbfl \
--with-onig \
--enable-pdo \
--with-mysqli=mysqlnd \
--with-pdo-mysql=mysqlnd \
--with-zlib-dir \
--with-pdo-sqlite \
--with-readline \
--enable-session \
--enable-shmop \
--enable-simplexml \
--enable-sockets \
--enable-sysvmsg \
--enable-sysvsem \
--enable-sysvshm \
--enable-wddx \
--with-libxml-dir \
--with-xsl \
--enable-zip \
--enable-mysqlnd-compression-support \
--with-pear \
--enable-opcache
configure error:
1.configure: error: xml2-config not found. Please check your libxml2 installation.
解决:
$ yum install libxml2 libxml2-devel
2.configure: error: Cannot find OpenSSL's evp.h
解决:
$ yum install openssl openssl-devel
3.configure: error: Please reinstall the BZip2 distribution解决:
$ yum install bzip2 bzip2-devel
4.configure: error: Please reinstall the libcurl distribution - easy.h should be in curl-dir/include/curl/解决:
$ yum install libcurl libcurl-devel
5.If configure fails try --with-webp-dir=DIR configure: error: jpeglib.h not found.
解决:
$ yum install libjpeg libjpeg-devel
6.If configure fails try --with-webp-dir=DIR
checking for jpeg_read_header in -ljpeg... yesconfigure: error: png.h not found.
解决:
$ yum install libpng libpng-devel
7.If configure fails try --with-webp-dir=DIR
checking for jpeg_read_header in -ljpeg... yeschecking for png_write_image in -lpng... yesIf configure fails try --with-xpm-dir=DIR
configure: error: freetype-config not found.
解决:
$ yum install freetype freetype-devel
8.configure: error: Unable to locate gmp.h解决:
$ yum install gmp gmp-devel
9.configure: error: mcrypt.h not found. Please reinstall libmcrypt.
解决:
$ yum install libmcrypt libmcrypt-devel
10.configure: error: Please reinstall readline - I cannot find readline.h解决:
$ yum install readline readline-devel
11.configure: error: xslt-config not found. Please reinstall the libxslt = 1.1.0 distribution解决:
$ yum install libxslt libxslt-devel
6.编译与安装
$ make make install
这里要make好久,要耐心一下
7.添加 PHP 命令到环境变量
$ vim /etc/profile
在末尾加入
PATH=$PATH:/usr/local/php/bin
export PATH
要使改动立即生效执行
$ ./etc/profile
或
$ source /etc/profile
查看环境变量
$ echo $PATH
查看php版本
$ php -v
8.配置php-fpm
$ cp php.ini-production /etc/php.ini
$ cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf$ cp /usr/local/php/etc/php-fpm.d/ /usr/local/php/etc/php-fpm.d/ cp sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm$ chmod +x /etc/init.d/php-fpm
9.启动php-fpm
$ /etc/init.d/php-fpm start
配置nginx虚拟机,绑定域名/str
1.
/str
$ vim /etc/nginx/conf.d/php7.thinkcmf.com.conf这里可以把php7.thinkcmf.com.conf改成自己的域名把下面的内容复制到php7.thinkcmf.com.conf里server{
listen 80;
server_name php7.thinkcmf.com;
root /var/www/html/php7.thinkcmf.com; # 该项要修改为你准备存放相关网页的路径location / {
index index.php index.html index.htm;
#如果请求既不是一个文件,也不是一个目录,则执行一下重写规则if (!-e $request_filename)
{
#地址作为将参数rewrite到index.php上。
rewrite ^/(.*)$ /index.php/$1;
#若是子目录则使用下面这句,将subdir改成目录名称即可。
#rewrite ^/subdir/(.*)$ /subdir/index.php/$1;}
}
#proxy the php scripts to php-fpm
location ~ \.php {
include fastcgi_params;
##pathinfo支持start
#定义变量 $path_info ,用于存放pathinfo信息set $path_info "";
#定义变量 $real_script_name,用于存放真实地址set $real_script_name $fastcgi_script_name;#如果地址与引号内的正则表达式匹配
if ($fastcgi_script_name ~ "^(.+?\.php)(/.+)$") {#将文件地址赋值给变量 $real_script_name
set $real_script_name $1;
#将文件地址后的参数赋值给变量 $path_info
set $path_info $2;
}
#配置fastcgi的一些参数
fastcgi_param SCRIPT_FILENAME $document_root$real_script_name;fastcgi_param SCRIPT_NAME $real_script_name;fastcgi_param PATH_INFO $path_info;
###pathinfo支持end
fastcgi_intercept_errors on;
fastcgi_pass 127.0.0.1:9000;
}
}
2.重启nginx
$ service nginx reload
3.
$ vim /var/www/html/php7.thinkcmf.com/index.php/str
把下面的代码复制到这个文件 里
?php
phpinfo();
4.查看访问
linuxcentos7中怎么搭建php服务器
centos7建立服务器 Centos 7 中 :装jdk+Tomcat+mysql+php+phpAdmin 服务器这样呢,希望能帮到你,如果还有不明白的话,你可以在后盾人看看视频找找答案,有空多看看时间长了,慢慢就明白了,希望能帮到你,给个采纳吧谢谢♫ヽ(゜∇゜ヽ)♪
如何在centos7搭建web服务器
首先,需要在centos7上面配置网站所需要的环境。
如果说你不会配置网站环境,那可以安装webmin、kloxo、cp等面板来使用。
因为这样的面板在配置好之后都是配置好网站所需要的阿帕奇、mysql等环境的。
centos7部署php网站需要什么步骤
1、搭建LAMP (apache+mysql+PHP)环境,即安装与配置
2、安装vsftpd服务,以用于FTP上传与下载
如何在阿里云Centos7服务器下安装部署Nginx+PHP+Mysql+PHP扩展
1、典型的LNMP安装问题
2、首先你得准备编译环境
yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers bison lynx
3、下载所需MySQL/nginx/php等安装包
4、安装nginx和mysql没有先后顺序
5、安装php依赖包,安装php,安装php扩展及优化包
6、详细的安装步骤可以网上查LNMP安装步骤